Vehicles
Sections
80 not categorized PORSCHE 944S USED PARTSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1974-77 (includes uncategorized and accessory items) FVD3511M29016A This line is dedicated to the most demanding customers.this braking system originates from the racing components, consisting of a ventilated, integral or composite disc, aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts. Please remember that in the European community, gran turismo products may only be used in racing and on private roads, unless you have obtained a new approval in compliance with directive 98/12/ec. Proven on-track performance; disperses gasses, cleans pads for better 'bite'; reduces 'usprung weight' for better handling; provides maximum braking force without the flex of sliding callipers; reduces heat-related stress, increases ...(choose a part on the right to read more)
$5,054.50
Make a selection FVD3511N29501A This line is dedicated to the most demanding customers.this braking system originates from the racing components, consisting of a ventilated, integral or composite disc, aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts. Please remember that in the European community, gran turismo products may only be used in racing and on private roads, unless you have obtained a new approval in compliance with directive 98/12/ec. Proven on-track performance; disperses gasses, cleans pads for better 'bite'; reduces 'usprung weight' for better handling; provides maximum braking force without the flex of sliding callipers; reduces heat-related stress, increases ...(choose a part on the right to read more)
$5,384.50
Make a selection FVD3522C28007A This line is dedicated to the most demanding customers. This braking system originates from the racing components, consisting of a ventilated, integral or composite disc, aluminum calipers, a complete set of high-performance brake pads, TUV/dot homologated metal-braided brake hoses and high-quality fastener hardware. Features: proven on-track performance; extraordinarily powerful and consistent under the repeated loads. Disperses gasses, cleans pads for better "bite". 2 piece rotors reduce "un-sprung weight" at each corner for better handling. Provides maximum braking force without the flex of sliding calipers. Reduces heat-related stress, increases brake performance and pedal feel. Aggressive pads that las...(choose a part on the right to read more)
$3,954.50
Make a selection FVD3511M29007A This line is dedicated to the most demanding customers.this braking system originates from the racing components, consisting of a ventilated, integral or composite disc, aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts. Please remember that in the European community, gran turismo products may only be used in racing and on private roads, unless you have obtained a new approval in compliance with directive 98/12/ec. Proven on-track performance; disperses gasses, cleans pads for better 'bite'; reduces 'usprung weight' for better handling; provides maximum braking force without the flex of sliding callipers; reduces heat-related stress, increases ...(choose a part on the right to read more)
$5,054.50
Make a selection FVD3522P38056AS The brembo gran turismo s (gt-s) braking system is ideal for clubsport and sprint type track events. The GT-s type iii system utilizes brembo type iii aggressive face type discs that offer high initial response with a smooth pedal feel. The type iii offers the highest overall braking confidence and control, allowing a quick qualifying time or top results in sprint races. Gt-s systems contain advanced calipers that include racing style radiators, dual inner piston seals, an inner pressure seal and an outer wiper seal. This innovative design provides the best combination of performance and long-lasting track use. The calipers are hard anodized in black (machined brembo logo in red) for resistance to corrosion and...(choose a part on the right to read more)
$4,174.50
Make a selection FVD72150000 Our software is capable of displaying and clearing trouble codes on most control modules. Most Porsche cars made since 1990 have multiple computers built into different parts of the car. These computers are capable of self-diagnosis. In other words, the car knows what is wrong and our tool allows you to see this information. Until now people needed to rely on car dealers to read this information from each of the car's computers. Now our software allow shops and individuals to read the fault code information out of most control modules. What does it do? · reset service reminders · reads diagnostic trouble codes · displays actual values · shows ecu information · clears diagnostic trouble codes ÂÂ...(choose a part on the right to read more)
$390.50
Make a selection FPOR4215 B&b muffler single inlet w/twin outlet Porsche 911sc 75-83 General Fitment911 1974-77911 1978-83
From $1,409.65
Make a selection FVD72150001 Our software is capable of displaying and clearing trouble codes on most control modules. Most Porsche cars made since 1990 have multiple computers built into different parts of the car. These computers are capable of self-diagnosis. In other words, the car knows what is wrong and our tool allows you to see this information. Until now people needed to rely on car dealers to read this information from each of the car's computers. Now our software allow shops and individuals to read the fault code information out of most control modules. What does it do? · reset service reminders · reads diagnostic trouble codes · displays actual values · shows ecu information · clears diagnostic trouble codes ÂÂ...(choose a part on the right to read more)
$325.60
Make a selection FVD911503185186 This seal kit consists of original part # 911 503 185 00 (left) and 911 503 186 00 (right). The set can be used on the trailing edge of the front fender at the cowl just below the windshield. It is also used under the back of the rear quarter panel where it meets the bumper side panel. Genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold as a set. 1 set is necessary for front fenders and one set is necessary for the rear. Please note: this is the thinner width. This is not the thicker width from the SC models.
$14.93
Make a selection I07 The word "cardboard" and "Porsche" should not be used in the same sentence, not to mention be used in the actual car. But they did, and now we have a solution. Rennline’s aluminum blower assembly cover is a direct replacement of that cardboard eyesore that the factory installed in your car. Constructed from anodized aluminum and utilizes the factory mounts. All stainless steel hardware required for installation is included. This part fits left hand drive (lhd) cars only. Silver. General Fitment930 1975-77911 1974-77 911 1965-69 911 1970-73
$163.90
Make a selection GR2020 Specially formulated to reduce oil consumption and leakage in high mileage cars. The molecular structure of motor oil saver prolongs engine life while reducing smoking caused by worn internal engine parts. As an added bonus, it rejuvenates gaskets and seals. This product should be added with each oil change for maximum benefit and protection. General FitmentACCESSORY
$8.00
Make a selection HEI600063 With dmsb license for all 45 mm roll bars for installation in existing bars and cages from heigo (as well as all other manufacturers) 1. To be used with all active rollover protection with a dmsb- or ons certificate from heigo 2. To be used with all active rollover protection with a dmsb- or ons certificate from matter gmbh (graben-neudorf) 3. To be used in so called self constructed devices as decribed in chapter 2 53-8.1.a in the current attachement j or chapter 2 53-8.4 in the old attachment j under the isg. 4 . This harness bar is only allowed to be used at dmsb-events and only at non fia events. Every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have...(choose a part on the right to read more) General FitmentALL
From $400.79
Make a selection HEI981001001S Heigo motorsports has been building extremely safe roll cages and roll bars for Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. Chromoly steel 1.5 inch diameter tubing, .098 wall thickness tubing. A true bolt in bar that does not require drilling or welding. Includes a harness bar which is located on the b-pillar hoop. Bars which connect to the main hoop, use a connecting joint system so that you can easily access the motor without the use of tools. Tig welded. Retains full seat adjustability. Factory seat belts or 5-6 point belts can be used. Semi-gloss black finish. The front hoop mounts to the upper bulkhead, in the OEM m...(choose a part on the right to read more)
$1,428.90
Make a selection I06 The word "cardboard" and "Porsche" should not be used in the same sentence, not to mention be used in the actual car. But they did, and now we have a solution. Rennline’s aluminum blower assembly cover is a direct replacement of that cardboard eyesore that the factory installed in your car. Constructed from anodized aluminum and utilizes the factory mounts. All stainless steel hardware required for installation is included. This part is for right hand drive (rhd) cars only. Silver. General Fitment930 1975-77911 1974-77 911 1978-83 911 1984-86 911 1987-89
$163.90
Make a selection I06B The word "cardboard" and "Porsche" should not be used in the same sentence, not to mention be used in the actual car. But they did, and now we have a solution. Rennline’s aluminum blower assembly cover is a direct replacement of that cardboard eyesore that the factory installed in your car. Constructed from anodized aluminum and utilizes the factory mounts. All stainless steel hardware required for installation is included. This part is for right hand drive (rhd) cars only. Black in color; silver shown. General Fitment930 1975-77911 1974-77 911 1978-83 911 1984-86 911 1987-89
$163.90
Make a selection I05 The word "cardboard" and "Porsche" should not be used in the same sentence, not to mention be used in the actual car. But they did, and now we have a solution. Rennline’s aluminum blower assembly cover is a direct replacement of that cardboard eyesore that the factory installed in your car. Constructed from anodized aluminum and utilizes the factory mounts. All stainless steel hardware required for installation is included. This part fits left hand drive (lhd) cars only. Silver. General Fitment930 1975-77911 1974-77 911 1978-83 911 1984-86 911 1987-89
$163.90
Make a selection KEV53100501 Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar / carbon door that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 4 kg (8.81 lbs) - kevlar / carbon - mounting is just like factory, no modifications are necessary. ** does not include the inner protection bar please note: these are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. Hinges are not provided; original hinges must be used. Please let us know the year and model and if you intend to use electric windows and electric...(choose a part on the right to read more)
$3,285.70
Make a selection KEV53100601 Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar / carbon door that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 4 kg (8.81 lbs) - kevlar / carbon - mounting is just like factory, no modifications are necessary. ** does not include the inner protection bar please note: these are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. Hinges are not provided; original hinges must be used. Please let us know the year and model and if you intend to use electric windows and electric...(choose a part on the right to read more)
$3,285.70
Make a selection NLA10890300
$71.50
Make a selection VDO600845 Snap-in warning lights with 12-v bulbs from vdo. These are used specifically with the 914 aluminum gauge cluster (part number rmb24172), but can be used with all models. General FitmentALL
$21.95
Make a selection VDO600847 Snap-in warning lights with 12-v bulbs from vdo. These are used specifically with the 914 aluminum gauge cluster (part number rmb24172), but can be used with all models. General FitmentALL
$21.95
Make a selection VDO600846 Snap-in warning lights with 12-v bulbs from vdo. These are used specifically with the 914 aluminum gauge cluster (part number rmb24172), but can be used with all models. General FitmentALL
$21.95
Make a selection ER1T911UTB Sway bar through body backer plate for 911 1974-89. These year 911s are not originally equipped with through-the-body sway bars. These u-tab brackets must be used when installing performance hollow front sway-bars, part number rer1t911sbf. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89
$26.00
Make a selection 93011312001GEB Genuine part sourced in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$224.40
Make a selection 9A160210407 A coil-on-plug or pencil coil requires a single spark plug and requires as many coils as there are cylinders. If your ignitions coils are failing, you will experience a rough idle, loss of performance, engine misfires, reduced fuel economy, a check engine light and a no-start condition. Replace it with this genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold individually. 6 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment. This part number is currently the latest supersession and can be used in place of part # 9a1 602 104 06. The spark plug is sold separately.
From $59.40
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |